Jump to content

Found 4x140 to 5x100 Wheel Adapters

Recommended Posts

Peugeot wheels are lug centric, so while you could likely use those I’m not sure you’d be able to properly center them since they’re bolted to the hub from the back side.

m14 would likely still be loose in the stud holes as Peugeot wheel studs have a decent sized splined interference fit.  Ideally you’d need some conical washers or bushings that centered the m14 bolts when tightening the adapter bolts...

These do look like a decent backyard adapters, but for $500 I’d want them done on a lathe and machined to center on Peugeot hubs.


Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Create New...