On Feb 20, 2005, at 9:09 AM, lancia_zagato wrote:
> I did check the voltage per the procedure on page F2.106 (1). I get
> 12.3V (12.3-12.4 directly at the battery). I also measured the
> resistance on the connectors and get 6.2. I get 2.5 ohm from the
> center pin on the injection relay to each of the pins at the connector
> A. Once i reconnect that and measure the voltage, it's 8.9V. I'm
> assuming this is all within specs.
>
With everything hooked up and the key on run you should be seeing 12
volts
at the center pin (pin 4) on the injection relay (wire 31). (I'm
working with an '87 manual but I don't think these numbers changed). It
sounds like the relay is not passing all the current.
Peat
- Yahoo! Groups Sponsor --------------------~-->
Give the gift of life to a sick child.
Support St. Jude Children's Research Hospital's 'Thanks & Giving.'
http://us.click.yahoo.com/5iY7fA/6WnJAA/Y3ZIAA/4jLplB/TM
--------------------------------------------------------------------~->
Recommended format for your email subject lines:
Model # [Model Letters] Year Subject
Examples:
505 88 V6 Mileage
405 Mi16 89 Ignition Coil source?
To unsubscribe from this list send a blank email message to PEUGEOT-L-UNSUBSCRIBE@EGROUPS.COM
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/peugeot-L/
<*> To unsubscribe from this group, send an email to:
peugeot-L-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Received on Fri Feb 25 17:58:19 2005
