Actually Bob it's $253 for a new one ($333 if you have ABS). I have
new non-ABS hubs for $100 though.
Brian Holm
At 09:13 PM 2/26/2006, Bob Bruce wrote:
>I have a noisy bearing in the rear hub of my 405.
>So I pull the brake stuff and undo the 40 mm nut
>Hook the slide hammer onto the hub and whack whack
>it's off the spindle except of course for the inner race.
>
>I was under some delusion that it was the same bearing as the
>505 rear and the 405 front. So when it's obviously I was wrong
>I looked in the fische and the damn bearing is part of the hub
>i.e. not a separate piece.
>
>That means instead of a $50 bearing and some fancy press work
>it is probably $200 + for a new hub.
>
>God bless their little French hearts
>
>Bob
Brian Holm, Parts for Peugeots
at Peugeot Holm, since 1969
2120 Maple Hill
Plainfield, VT, 05667
802-454-7132, fax -1310
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.375 / Virus Database: 268.1.0/269 - Release Date: 2/24/2006
[Non-text portions of this message have been removed]
Recommended format for your email subject lines:
Model # [Model Letters] Year Subject
Examples:
505 88 V6 Mileage
405 Mi16 89 Ignition Coil source?
To unsubscribe from this list send a blank email message to PEUGEOT-L-UNSUBSCRIBE@EGROUPS.COM
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/peugeot-L/
<*> To unsubscribe from this group, send an email to:
peugeot-L-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Received on Tue Feb 28 08:18:19 2006
