OnXN6 Oil bath air filter: there is a faq on this somewhere in the archives.
Ontips: be patient I think shop time for this is over an hour: be careful
Onwith that rubber bellows that leads to the throttle body; if you have a
Onvacuum pump, that can get a lot of the dirty oil out, enough to see the
Onscreen retaining screws 8mm heads if I recall, maybe 9; it is a tight
Onreach with the sensor plate housing just pushed far enough to the side/rear
Onto reach in; paper towels for the thick layer of sludge in the base; then
Onreplace the screen and fill with motor oil to the top of the screen. It can
Ononly be experienced!
On 02/23/2008 5:14 PM, "Lance" <ducaati@gmail.com> wrote:
>
> Well, since I have things apart in this area, I might as well pull the air
> cleaner out and have a look. This model (1985 505s, XN6 engine)) is not
> covered in Haynes. Any tips?
On[Non-text portions of this message have been removed]
Received on Sat Feb 23 20:44:48 2008
