Does it use torque to yield bolts? If so, REPLACE.
Normal bolt:
Instructions = Torque to ** Nm, then to ** Nm. Retorque if necessary
Bolt stays in elastic range (ie returns to same length on removal)
Re-use okay
Torque to yield bolt
Instructions: Torque to ** Nm, tighten 90°.
Bolt is permanently stretched during installation.
DO NOT reuse bolt.
DO NOT re-torque head.
Kevin
the505inme wrote:
>When re/re ing the cyl head on a N9TE motor, do the head bolts have to
>be replaced?
>
>
>
>
Recommended format for your email subject lines:
Model # [Model Letters] Year Subject
Examples:
505 88 V6 Mileage
405 Mi16 89 Ignition Coil source?
To unsubscribe from this list send a blank email message to PEUGEOT-L-UNSUBSCRIBE@EGROUPS.COM
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/peugeot-L/
<*> To unsubscribe from this group, send an email to:
peugeot-L-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Received on Thu Jul 7 20:47:55 2005
