Gil
Check for electrical continuity between opposite tabs on the switch
in N or P (those will be the N-S safety switch). The remaining pair
of terminals will be the reverse light, should have continuity with
the shift lever in R. If the switch won't work because it is just
worn, try removing the washer and screwing the switch in a bit
further than it would go with the washer. If it works then, thin the
washer down by rubbing on a file or sanding block.
I have a used switch if you need one.
Brian Holm
At 02:49 PM 7/18/2006, ouigpt wrote:
>My 1978 504D automatique's back-up
>lights do not work{Yes lamps are good.}.
>The switch itself is screwed in such
>that a green wire{spade connection} is
>outboard{toward driver's door}. I undid
>this connection and went no further.
>Which of the four wires on this switch
>goes to back-up lamps? If wiring checks
>OK, anybody have a spare?
>
>thanks in advance,
>Gil
>
>
>
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.1.394 / Virus Database: 268.10.1/389 - Release Date: 7/14/2006
Brian Holm, Parts for Peugeots
at Peugeot Holm, since 1969
2120 Maple Hill
Plainfield, VT, 05667
802-454-7132, fax -1310
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.394 / Virus Database: 268.10.1/389 - Release Date: 7/14/2006
[Non-text portions of this message have been removed]
Recommended format for your email subject lines:
Model # [Model Letters] Year Subject
Examples:
505 88 V6 Mileage
405 Mi16 89 Ignition Coil source?
To unsubscribe from this list send a blank email message to PEUGEOT-L-UNSUBSCRIBE@EGROUPS.COM
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/peugeot-L/
<*> To unsubscribe from this group, send an email to:
peugeot-L-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Received on Tue Jul 18 18:10:34 2006
