I have a flex plate in good condition. $25 shipped anywhere in US 48
states.
tj
- In peugeot-L@yahoogroups.com, "Nathan" <beanis@c...> wrote:
> I have a black 89 405s that has been sitting in my garage for
about a
> year now that needs a new home. The only thing it needs is a flex
> plate
> to be back on the road agin. I put new valve steam seals in the
car
> before i started taking the tranny out to do the flex plate job.
The
> car is ready for a flex plate with the tranny out and the engine
is
> still in the car. The body is very straight with minimal dings. The
> car
> as is will have to be towed, but i would consider putting the car
> back
> together with a new flex plate for a reasonable sum. Its way too
nice
> to be a parts car, the leather isnt too bad inside although the
dash
> has some cracks like most 405's ive seen. It has the 14" alloys
and i
> have 2 of the original covers! I am the 2nd owner of the car. The
ac
> will work, but i have had a problem getting the evap. core to seal
> with
> the out side lines. The car runs very strong, i just dont have time
> to
> mess with it any more. Id rather drive my STX and put money in to
it
> than my 405. Im asking 600$ firm due to the amount of new and good
> parts in this car but im willing to come down for the right person.
> The
> engine and tranny (was replaced by peugeot at around 30K) are very
> strong! Email me @ Beanis@c...
Recommended format for your email subject lines:
Model # [Model Letters] Year Subject
Examples:
505 88 V6 Mileage
405 Mi16 89 Ignition Coil source?
To unsubscribe from this list send a blank email message to PEUGEOT-L-UNSUBSCRIBE@EGROUPS.COM
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/peugeot-L/
<*> To unsubscribe from this group, send an email to:
peugeot-L-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Received on Fri Aug 12 11:27:50 2005
