At 01:39 PM 8/21/2005, Karydas wrote:
Sorry Thanos, I gotta stop doing this from memory. I don't think any 504
crossmember will accept the zdjl mounts. The engine mount lower part must
mount on top of the crossmember, not on the side. The 505 crossmember may
work, except that I don't think the early 504 steering rack will mount on it.
On the bellhousing clearance, there is a brace from the bellhousing to the
transmission which could bump the firewall I suppose.
Brian Holm
>Thank you, Brian. The air filter is not a problem as I have already
>replaced it with a K%N cold air intake. I also have a 505 crossmember
>that I can use, will that work?
>
>Are your clearance concerns based on the length of the ZDJL compared to
>an XN1? I thought it was a tad longer.The 504 is a 1973 by the way.
>
>Thanos
>
>-----Original Message-----
>From: Brian Holm [mailto:peugeots@vtlink.net]
>Sent: Sunday, August 21, 2005 8:49 PM
>To: pkarydas; peugeot-L@yahoogroups.com
>Subject: Re: [Peugeot-L] zdjl in a 504?
>
>Thanos, '73 or earlier, no -- the engine crossmember is different. '74
>on the only problems I can think of are mounting the air filter/AFM, and
>possible clearance problems with the firewall and bellhousing brace. I
>haven't done it or seen it done, but I don't think of any other
>problems.
>
>Brian Holm
>
>At 02:26 PM 8/20/2005, pkarydas wrote:
>
>
>
>Does anyone know for sure if a ZDJL engine and BA7/5 transmission and J
>differential will bolt directly (without any brackets, cuts, welds, etc)
>into a 504 in place of its current XN1, BA7/4 and 3.89 differential?
>
>Thank you, Thanos
>
>
Brian Holm, Parts for Peugeots
at Peugeot Holm, since 1969
2120 Maple Hill
Plainfield, VT, 05667
802-454-7132, fax -1310
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.338 / Virus Database: 267.10.13/78 - Release Date: 8/19/2005
[Non-text portions of this message have been removed]
Recommended format for your email subject lines:
Model # [Model Letters] Year Subject
Examples:
505 88 V6 Mileage
405 Mi16 89 Ignition Coil source?
To unsubscribe from this list send a blank email message to PEUGEOT-L-UNSUBSCRIBE@EGROUPS.COM
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/peugeot-L/
<*> To unsubscribe from this group, send an email to:
peugeot-L-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Received on Sun Aug 21 16:05:28 2005
