There is no power to the signal wire at the solenoid when the key is turned. I've eliminate by simple replacement: the ecu, the ignition switch. I've replaced the ignition relay and cleaned contacts but I'm not positive that the relay was good or that the contacts are ok. I've had many problems in this area. In looking at the engine manual, I couldn't tell for sure which wires at the relay are supposed to be hot when the ignition is turned and which one is ground. I haven't checked the diode.
So my questions are: are there grounds that I should check, safety switch, ?. Thanks in advance. Rulon
How low will we go? Check out Yahoo! Messenger’s low PC-to-Phone call rates.
[Non-text portions of this message have been removed]
Recommended format for your email subject lines:
Model # [Model Letters] Year Subject
Examples:
505 88 V6 Mileage
405 Mi16 89 Ignition Coil source?
To unsubscribe from this list send a blank email message to PEUGEOT-L-UNSUBSCRIBE@EGROUPS.COM
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/peugeot-L/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/peugeot-L/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:peugeot-L-digest@yahoogroups.com
mailto:peugeot-L-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
peugeot-L-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Received on Mon Sep 25 19:41:45 2006
