I have seen some 504 headlights where there was a small clip that could
be switched to either LHD or RHD. Then the bulb was installed in the
back and the required pattern obtained.
I had a 604 headlight that was in a RHD car, but was actually a LHD
headlight. Forcibly rotating the bulb holder did move the flare up from
the right side to the left side where it was needed.
60° sounds like too much, I would have said about 10° to 20° (it is the
same amount needed as the angle of the flare up)/
Regards,
Kevin
Alex Zepeda wrote:
>Supposedly if you can rotate the bulb (with some manhandling I
>suspect) about 60 degrees, you can get the proper pattern.
>
>
>
Recommended format for your email subject lines:
Model # [Model Letters] Year Subject
Examples:
505 88 V6 Mileage
405 Mi16 89 Ignition Coil source?
To unsubscribe from this list send a blank email message to PEUGEOT-L-UNSUBSCRIBE@EGROUPS.COM
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/peugeot-L/
<*> To unsubscribe from this group, send an email to:
peugeot-L-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Received on Mon Oct 31 00:47:58 2005
